Align 450 Pro V2 3GX Build Guide Part 4, Assembling The Tail

[Tony]

Tony submitted a new Article:

Align 450 Pro V2 3gx Build Guide Part 4, Assembling The Tail

Here is Part 4, Assembling the tail of the Align 450 Pro V2 3GX. This is a Torque Tube (TT) tail, so assembly is very easy. No need to fish a belt through the tail and make sure it's not kinked or twisted, just plug in the shaft and go.

You do want to make sure to check every bolt on this tail however. Every one of them on the tail was loose and needing thread lock. This is a good thing since you can make sure it's done correctly. The Horizontal Stab in this step is put on with very light pressure so we can still move it later. Enjoy!

[video=youtube_share;1uYmiGufBRQ]​

Read more about this article here...