tommyboy660
Member
First off let me start out with i have a Trex 450 Pro 3gx that has been upgraded with an phoenix ice 50 esc, scorpion 2221-8, & currently runs on 3s lipos. My question for that is how do i go about to figure out the max voltage i can run ie cells i can run on it at once either in parrellel or in line?
After finding out that info i need to know for fact if this will be possible for my diy lipo build. So i have purchased 6x 2cell turnigy nano-tech 30c lipos 950mah each cuz they only cost me a mire $3.50 via hobby king so i figured i could do something with them. So if u havent donr the math atyet im planning on makin 2 full lipos that in my calculation, planning and theary should be 6s1p 30c & 2850mah all at under 300g & quite small at approx. 2"Lx1"Wx.75"D ill postexact specs & pics when i tackle the job. First off is this real world possible ive gone over itin my head many times & come out with the same answer of yes each time.
The reason i ask & would like others opinions on this, is if this is as easy as i believe it will be all while keeping under 300g, at 2850mah, & really quite small in oh & under $30 for 2 of them fully built then why is it ive searched all over & am unable to find any for sale of anywhere near those specs necause if i had that wouldve been ideal for all 450 heli owners aswell as alot of other brcaise it would also mean higher capacities for larger helis in small & lighter packs at low prices? The closest ive been able to find for an already built lipo is a 3000mah 3s @ 35c for $30 each off ebay and its.not necessarily a brand name either?
One last question how big of benefit am i looking at for my setup or a stock E-Flite Blade 450 3D between a 3s & 6s assuming the blade can even run on a 6s?
Thanks Tom & i hope i got atleast 60% if not beyter on my puncuation this time.
After finding out that info i need to know for fact if this will be possible for my diy lipo build. So i have purchased 6x 2cell turnigy nano-tech 30c lipos 950mah each cuz they only cost me a mire $3.50 via hobby king so i figured i could do something with them. So if u havent donr the math atyet im planning on makin 2 full lipos that in my calculation, planning and theary should be 6s1p 30c & 2850mah all at under 300g & quite small at approx. 2"Lx1"Wx.75"D ill postexact specs & pics when i tackle the job. First off is this real world possible ive gone over itin my head many times & come out with the same answer of yes each time.
The reason i ask & would like others opinions on this, is if this is as easy as i believe it will be all while keeping under 300g, at 2850mah, & really quite small in oh & under $30 for 2 of them fully built then why is it ive searched all over & am unable to find any for sale of anywhere near those specs necause if i had that wouldve been ideal for all 450 heli owners aswell as alot of other brcaise it would also mean higher capacities for larger helis in small & lighter packs at low prices? The closest ive been able to find for an already built lipo is a 3000mah 3s @ 35c for $30 each off ebay and its.not necessarily a brand name either?
One last question how big of benefit am i looking at for my setup or a stock E-Flite Blade 450 3D between a 3s & 6s assuming the blade can even run on a 6s?
Thanks Tom & i hope i got atleast 60% if not beyter on my puncuation this time.