Thanks Guys....
Here is a setup rundown..
BlueSkyRC xRotorSpider Quad
KDA20-22L 924kv motors
Graupner 10x5 E-Props
DJI Naza auto pilot
Next Level Multirotor esc. (They come programed for multirotors: NiCad cutoff, low voltage cut off, no brake, Med timing, soft cut off)
FPV:
5.8 gHz 500mw TX
2- 5.8 gHz RX
1- Patch 14db ant.
1- rubber omni dir. 5db ant
ORACLE - Diversity Controller
Fatshark Dominator goggles
Power for:
FPV ground station is done with 3s 2100 lithium ion
Quad is a 3s 3000mAh nano tech
5.8 gHz 500mw TX is a 3s 370mAh nano tech
If you have any question I will try to answer.
Thanks again for the comments...
Craig