Transmitter How To
I had a Subscriber on YouTube ask me how you adjust the stick tension on the DX9 and instead of just typing out a reply, I decided to make a quick little video on how to adjust your stick tension. Hope this helps someone out that was worried about tearing up their transmitter right after they...
In this video, I walk you through how to set up a basic airplane in the DX9. As always, if you have any questions, all you have to do is post below and we will help you out.
http://youtu.be/CcwGAS4xekk
For all of you new DX9 owners out there, as well as those that are looking into getting the DX9, here is the video on how to set up the Tx with basic Helicopter parameters. This video will walk you through the basics of getting that new bird up in the air.
As always, if you have any questions...
If there is one thing unique about computer transmitters, it's the ability to make them your own with your name, your backlight intensity, contrast and so on. In this video, I walk you through how to do just that as well as show you how to calibrate your sticks.
http://youtu.be/v6fdQeLlLr0
One of the first things you need to do with your new DX9 is update the firmware. If you don't, when you turn it on, and when you shut it off, it will give you a message telling you to register your DX9 and update the firmware. In this video, I show you step by step exactly how to do that.
Since selling off my DX8, I had to invest in a better Tx that will take me further into the future with this hobby, and the DX9 Black Edition was just the ticket!
This section has been moved into the How To section from just being in teh articles section.
On the left side, after you clicked on the How To link, you will notice that there are now more links just below it all with blue "+" signs to the left of them. If you click on those + signs, it will...
Hello and welcome to the All New RCH Transmitter How To section! This section has taken the place of the Helpful How-To that was in the forum before. In an effort to keep the forum clean and keep the information easy to access, we have moved everything into this section.
On the left side...
So you are ready to move up from your DX6i, and you went out and purchased a brand new DX7s/DX8. Now you look at it and wonder what all can be done with it. That is where this playlist will come in handy.
As time goes on, I will be adding more and more to the playlist, so make sure to check...
In this video, I explain what some of you have thought to be a bad DX8 or a DX8 that's going bad. In all reality, it's just a channel setting that's causing all of the issues. Hope this helps someone out there before they call Horizon or Spektrum.
http://youtu.be/bJ3u3GCcp80
In this video, I give you a look inside the Spektrum DX8. Some people need a visual look at what they are doing to get a better understanding of what's going on in there. There is no need to take the Tx apart when doing any adjusting of the sticks or modes, but this will help you better...
In this video, I'm going to show you one of the easiest things you can do to the DX8 to make it your own. Unlike the DX6i, the DX8 has holes in the case ready to adjust the sticks. Have a watch and let me know what you think.
http://youtu.be/aPdx7Z9aVUM
Alright everyone, I'm finally getting on with the DX8 videos. It's a slow process, but we are getting there.
In this video, I show you how to change your DX8 from Mode 2 which I use, to Mode 1 which is used in other countries. You may be asking, why in the world would I need to know this, I...
When you get your new DX8, you will want to setup a model in it. If you are flying helicopters, this is the video for you.
In this video we are in the System Setup menu and we go through all of the screens to set the basics up for a CCPM helicopter. From name and type, to switch select and trim...
Finally, we are going to start setting up the model memory in the DX8. In this video I walk you through setting up the model type, wing type, name and everything else needed to create a new Airplane model. If you have any questions, please click on the link above and sign up on the forum. We are...
I have gone and done it now. I sold my DX6i and purchased the DX8. This has to be one of the best Tx's I have ever had the pleasure of holding in my hand. It's just comfortable.
In this video, i will be doing a general overview of the DX8. In future videos, I will be digging deeper and...
When you get your DX8, the first thing you should do is go into the system Setup Menu and make it your own. In this video I show you exactly how to do this. One thing I forgot to include is in the battery menu within the setup menu, you can only adjust the warning and not the actual battery...
Since I purchased my DX8, the one question I have been asked the most is "what is the Raw Input Test Menu?". Well in the video below I explain what it is. I don't however know what the code is on the bottom left although I'm sure it's a diagnostic code of some sort or maybe that is the code that...
Hey everyone. There is information out there about D/R and Expo that is just flat out WRONG! I know a few that call themselves "Guru's" that have it totally wrong. Well, I want to help make it right. In the video below, you will hear, and see me explain how D/R and Expo work, and why you should...