setup

  1. Alex Evans

    450 Trouble, Trouble And More Trouble....

    Hello pilots, and those like me - trying to be... Bought myself a new Trex-450L Dominator DFC... I was under the impresion that it is an ARF, but was faced with a box filled with bits, and some surprises.... 1) The ESC , RCE-BL70G comes with the 3 motor plugs, too small diameter for the already...
  2. Goblin Build Pt 7 Installing The Servos

    Goblin Build Pt 7 Installing The Servos

    It's time to install the servos on the Goblin 380! We already did this in a live stream, but I'm not going to make everyone sit through over 10 hours of video just to see me install some servos. We we are redoing everything on this helicopter and going step by step. let me know if you have any...
    • Tony
    • Article
    • build video cyclic how to install installation rchelp dotcom rchelpdotcom sab goblin 380 sab goblin 380 build sab goblin 380 review sab heli division servo servo tester set up setup tail
    • Category: Goblin 380 Build Log
  3. Traxxas T-maxx 2.5 | Part 8 Suspension Arm Rebuild

    Traxxas T-maxx 2.5 | Part 8 Suspension Arm Rebuild

    Suspension setup is one of the most important things you can do to have a predictable vehicle. In this video, I show you, in depth, how I clean and adjust the suspension arms to get them ready to install back on the chassis. I also include a quick little setup tip to save yourself time in the...
    • Tony
    • Article
    • 2.5 3.3 a arm bearing clean control arm dirt dirty gas locked up mud muddy nitro nitro rc nitro truck radio control rc monster truck rc nitro truck rc truck rchelp dotcom rchelpdotcom rebuild refurbish remote control remote control cars series setup siezed suspension t maxx t-maxx t-maxx 2.5 t-maxx 3.3 t-maxx classic t-maxx rc truck traxxas traxxas t maxx traxxas t-maxx traxxas t-maxx 2.5 traxxas tmaxx tuning won't turn
    • Category: Traxxas T-Maxx 2.5
  4. J

    500 FLYBAR'D 450/500 SETUP

    After struggling with various types of flybar locks - including the one from Ron Lund - I devised my own which works very well and is quite easy to make. Here are the basic instructions: 1.) Make a platform out of 3/8" plywood large enough to place your heli on plus about 4-4.5" ; 2.) Center...
  5. N

    450 3GX Newbie and a few questions

    Am looking for any suggestions/recommendations on the 3GX itself. I'm flying my first 3GX 5.0 firmware on a CHEAP HK450 with $12 FBL conversion kit. 3S 2200 separate 2S 7.4V battery and BEC for RX and FBL+ servos. 50AMP ESC HK helidrive 3600K/V and 12 tooth pinion. All digital MG servos...
    • n8lbv
    • Thread
    • 3gx 450 gain problems setup
    • Replies: 51
    • Forum: Helicopters
  6. T

    Spektrum Post your DX7S files

    Like most ive seen the thread for dx8 files but theres nothing here for the new DX7S. So if anyone can will you please post your tx files if u have a DX7S, i hope to get all sorts of files for all helis and skill levels so ppl only have one quick stop and they can either fly on a maiden flight...
  7. T

    Spektrum DX7S basic beginner full setup from a to z.

    Hi, loke a few i own the DX7S but have noticed there really nowhere that helpswith setting it up for beginners setting for starting out, ive been able to find little scattered pieces of info that kind of relate but not specific to the DX7S. So could someone please post all the settings for this...
  8. L

    450 Trex 450 pro dfc 3gx servos in opposite direction

    Hello all!!! I followed the steps of the video 7 (Align 450 Pro V2 3GX Build Guide Part 7 Basic Gyro Setup) and I will try to explain what is going on. When I do the first step of the Gyro setup (elevator endpoint setup) and press the button again on the 3GX and turn the helicopter to...
  9. Tony

    General Setting Proper Blade Pitch

    I have written this many times in different threads but it always gets buried in the posts and is very hard to find. It's also one of the most asked questions here on RCH. So I thought I would do a dedicated STICKY to explain exactly how to setup correct blade pitch on a CCPM helicopter. YOU...
    • Tony
    • Thread
    • blade head mid negative pitch positive settings setup stick
    • Replies: 80
    • Forum: Helicopters
  10. I

    450 kds flymentor setup help

    Hey guys, well its been 6 months now since I bought my kds 450s. and after listening to mike preach "patience and practice", I can finally hover pretty easily and have even taken off my training landing gear.! So now Im having trouble with the head in and simple circles so I got the kds...
Top Bottom