Quad 250 Mini Quaad

[WyDiablo]

On my 250 quad I had an esc to burn out so could I replace that esc with another one or should I just buy 4 more of the same kind? The esc's that came with the 250 quad are 12Amp. Here is the length to the motors and I was wondering also could I use a 10Amo esc?

Got Heli RC LLC - iPower MultiMate series - iPower MT1806 2300kv Long wire

 

[Tony]

You can just order another one of those ESC's as long as it's exactly the same. Just remember to go through the setup again though and calibrate it. But, You could order 4 more to have them all the same from teh same batch number, and that would give you 3 extras.

 

[WyDiablo]

Would 4 of these work with the motors that I have. The max current draw with my motors is 14 Amps.

Got Heli RC LLC - iPeaka ESC - iPeaka IQ 10amps esc (Simon K firmware)

 

[Tony]

I wouldn't run anything less than 12 on those motors, preferably 15a. Just in case you start flying "spirited".

 

[WyDiablo]

Thanks for the info Tony