500 Building a Sab Goblin 500, need some help

[amastron]

His guys, I need some help with what esc to use on my Goblin build. The motor I'm using is the Quantum 4120-1200 KV. I had planed to use the Talon 90 but the one I looked at had no motor wires, you plug the motor right to the esc.
Problem with that is my motor wires are not long enough to make it to the esc, if you know a Goblin 500 you know what I mean. So, any suggestions are very much appreciated.

 

[murankar]

two things 1) make jumper wires or 2 extend the wires on the motor to the esc. A Hobbywing 100 LV would work just fine on that. It has a built in BEC and has a decent governor. Add the program box for $27 and your set. I just installed the 100 amp Platinum Pro V3 on my 570, down side no BEC so I went RX pack for now.

 

[amastron]

Thank you for the information, I think the best out to this would be going with the HobbyWing Platinum V3 100 amp, I have the program box now for the HobbyWing 50 amp I have on my 450L. Thank you so much, problem solved!