Nl Henderson
Member
Well I fished the build on the G500 but am just too dang nervous to maiden it. maybe I can get some help from the more experienced heli pilots out there.
Here is my set up
1.) Quantum 4120-1200
2.) CC talon 90 ESC
3.)Hercules mini BEC - not yet installed
4.)Ikon FBL
5.)MKS tail Servo - HBL 980
6.)MKS cyclic servos - DS 9660 A+
7. 2 - Pulse 4500 45C Lipos
I need some help setting up the govenor mode on the talon 90 (if it has one)
Also, what pitch/throttle curves do I need to set it up in IUP1 & IUP2 & normal flight as well
Also throttle hold, what pitch do the main blades need to be at when in throttle hold position for autos (if indeed this was necessary)
Thanks in advance for the help!! I'll send some pics when later
Here is my set up
1.) Quantum 4120-1200
2.) CC talon 90 ESC
3.)Hercules mini BEC - not yet installed
4.)Ikon FBL
5.)MKS tail Servo - HBL 980
6.)MKS cyclic servos - DS 9660 A+
7. 2 - Pulse 4500 45C Lipos
I need some help setting up the govenor mode on the talon 90 (if it has one)
Also, what pitch/throttle curves do I need to set it up in IUP1 & IUP2 & normal flight as well
Also throttle hold, what pitch do the main blades need to be at when in throttle hold position for autos (if indeed this was necessary)
Thanks in advance for the help!! I'll send some pics when later