700 Help with normal pitch curve setup on trex700e DFC using ar7200bx.

[hatchet]

setting up my throttle curve and pitch curve what's best to use for normal,I'm not use the governor mode.but got an idea of the set up on the throttle curve saying use 30% flat which will give me 1800 to 2000 rpm.i don't do 3d so no drarmmes there.just wondering what pitch curve to use for this.anyone?

 

[Tony]

For pitch curve, I set everything I own at 46 48 50 75 100 in normal, and linear in all the idle up modes. However, some of my helicopters I have linear on all settings.

 

[hatchet]

Cheers tony
Thanks for the advise.chris

 

[Smoggie]

My advice would be to ditch the normal mode and use idle up (preferably governed) in all flight modes. There is no logical reason to use normal mode on an electric heli, it's really just a carry over from i.c. power helis. Normal mode is just an accident waiting to happen, it's just a matter of time before you forget what mode you are in and either flip inverted or otherwise hit full negative pitch and cut the motor.

Friends don't let friends fly normal mode!