Quad Motor Or Esc Problem?

D.O.G.

D.O.G.

Goblin 380 Supporter
Well I installed new esc and new motors on my Shuriken 180. The first power up I did encounter some smoke :(. After inspection some soldered was found were it wasn't suppose to be. I clean it up, re solder the esc and motor but now I'm not sure what is the problem now. I don't know if the motor or the esc went bad during the smoking session.
 
Thanks Keith :). I do have a spare esc but not a motor. I wait on ordering new motors then.
 
Stick on that spare ESC and see what happens. I would check to make sure the motors are not shorted though by running some resistance tests on the leads.
 
Well thank you Tony and Keith. I put a new esc on and soldered the motor back on. Plug the usb in and went to the motor section of Cleanflight to calibrates the esc and when I plug the battery in ... well you can say FIRE came ouit of the motor :(. I guess I will be ordering new motors Huh Lol
 
This is why I stated to check the motors with a multi-meter first. Just in case. Sucks that you lost another ESC though.
 
Yeah Tony but I didn't get to your post til I was done replacing the esc. Plus my multi meter the other day went south. Beside motors I better order another multi meter too Lol. I have plenty of ESC. Derek and I purchases 8 each of those Little bee 20a ESC from hobbyking USA last week when they were on sale for $4.95 each. Good thing I did Huh.
 
Tony said:
Man, I don't know what I would do without a multi-meter lol. I would go insane lmao.
Click to expand...
I've been getting cheesy ones from Walmart that don't last long... with me anyway. What do you have Tony or recommend that will last?
 
The one I have is a craftsman one from back in the 90's some time. Still works and is still accurate. But if you want a good one, get a Fluke.
 
You must log in or register to reply here.
Top Bottom