I decided to add led's to my zmr250 for better orientation and also program some nice features at the same time. I added 13 addressable led's to both front and rear of the quad. Wired them into the system so the main battery will power them. I also set up a switch on my dx9 to turn them on or off. After doing the wiring pattern in cleanflight is when I began setting up what colors each led would use and what features each would use, etc. (flight, arm, indicator and warnings). I assumed it would be able to use the warning part of the led programming to tell me when my battery was getting low in a cell per the cleanflight battery settings and ticking the box for battery low box. I was hoping to not need a buzzer for this low battery warning but to have certain led's flash when it was getting low. Instead I have these leds blinking all the time even with a fresh battery fully charged. For now I have removed the bat low tick box and took off that warning feature from the leds I was trying to use for that.
The question is, is there a way to have the leds blink when the battery is low or am I only able to use the buzzer per cleanflight?
The question is, is there a way to have the leds blink when the battery is low or am I only able to use the buzzer per cleanflight?