new2rcmod
New Member
I'm upgrading an old radio shack truck with a new 3750kv brushless, sensorless motor. 4Ch 2.4Ghz receiver 10 volt 45 amp max. But i can't find a hobby steering servo thats the same size and shape which it is an L shape servo with 2 motor wires and 4 other wires, so i was wondering can i wire the 6 wires to a 3 pin plug? I tested all 4 wires even to the motor wires and had 1 to 2 ohm resistance 12 ways that i tested. 2 motor wires are black and orange and the other 4 are yellow, green, red and blue. To me seems all 6 wires are connected to the servo motor with no coils in reference to a youtube video. Any help would be appreciated.