Tried to fly my quad with CC3D today after replacing the esc's. When giving throttle and at about take off speed the left side will lift up and giving more throttle it will either flip side ways or flip and spin at the same time. Motors spin in the right direction and props are on correctly. I have checked the wire connections from the CC3D to my rx and this is how I have mine connected to my Taranis X8R rx. The red wires have beem removed from all the esc's except #2 motor.
#1.....Red/Black/White
#2.....Blue
#3.....Yellow
#4.....Green
#5.....Orange
#6.....Purple
Motor #1 to #1 pins on CC3D
Motor #2 to #2 pins
Motor #3 to #3 pins
Motor #4 to #4 pins
- - - Updated - - -
Short video clip of what it does
[video=youtube_share;3xeWvarNqR0]https://youtu.be/3xeWvarNqR0[/video]
#1.....Red/Black/White
#2.....Blue
#3.....Yellow
#4.....Green
#5.....Orange
#6.....Purple
Motor #1 to #1 pins on CC3D
Motor #2 to #2 pins
Motor #3 to #3 pins
Motor #4 to #4 pins
- - - Updated - - -
Short video clip of what it does
[video=youtube_share;3xeWvarNqR0]https://youtu.be/3xeWvarNqR0[/video]