I assembled the new AMP 2814 heavy lift motors onto my hexa and spooled her up. After a couple of seconds it sounded like a wind chime made from aluminum tubing. So I disconnected all the motors and reconected only one motor back. I fired up the hexa and if that motor did not make a sound I did the next one just one motor at a time. So I have two motors that sound that way and one of them has a squeal to the motor. Has any one experienced any thing like this? I also had one of the esc's to get lightly warm no where near the hot range. I ask the company before I bought this kit if my 30Amp esc's would be ok for these motors and was told yes they are ok. And now he says they are not ok. He directed me to his expensive type esc's and they are way out of me price range. Also he stated that he hoped that the bec had been removed or I could damage something. But I read where his high price esc's also have a bec. Its kinda confusing on whats whats. Maybe I just need to by the 40Amp esc's and try then. This is the conversion kit below and the esc's that are on my hexa now.
http://aerialmediapros.com/store/pr...kit-with-arm-extensions-amp-2814-motors-p-158
http://thequadman.com/30A-ESC-Brushless-Motor-Speed-Controller-30AYESC.htm
Thanks
WyDiablo
http://aerialmediapros.com/store/pr...kit-with-arm-extensions-amp-2814-motors-p-158
http://thequadman.com/30A-ESC-Brushless-Motor-Speed-Controller-30AYESC.htm
Thanks
WyDiablo
Last edited: