Peter John Robertson
New Member
Have been flying my DJI Mavic Pro and Spark for several years now but recently bumped into a couple of youngster flying racing drones. Anyway to cut a long story short I got interested. So at 69 years young I thought now retired so let’s have some fun with whatever years are left.
Purchased to second hand racers both have F3 boards. Anyway found it not easy to fly these beast. Landed up tuning down all parameters, so now I can just about control them, albeit very slowly but have a great deal of trouble keeping them at any given height, so consequently more crashes then flight.
Best thing I thought was to change the board on one with a board that will allow me to add a gps/compass unit onto it. That way in my old mind will help me learn how to fly the beasts.
So have purchased a Ominbus Betaflight F4 OSD FPV V1 board but now find I am stumped as to how to plumb it in and cannot find anywhere that will help, plenty of stuff on other boards.
So is there anyone out there that can help out, it would be much appreciated and help out an old fart.
Purchased to second hand racers both have F3 boards. Anyway found it not easy to fly these beast. Landed up tuning down all parameters, so now I can just about control them, albeit very slowly but have a great deal of trouble keeping them at any given height, so consequently more crashes then flight.
Best thing I thought was to change the board on one with a board that will allow me to add a gps/compass unit onto it. That way in my old mind will help me learn how to fly the beasts.
So have purchased a Ominbus Betaflight F4 OSD FPV V1 board but now find I am stumped as to how to plumb it in and cannot find anywhere that will help, plenty of stuff on other boards.
So is there anyone out there that can help out, it would be much appreciated and help out an old fart.