webbizandy
New Member
Hi guys, I'm new to the forum and just getting back into flying after a 8 years and have been trying to get a Hobbyking 450 fbl pro going that I never finished. I have a Trex 550e and wanted test doing an FBL setup on the 450 first before touching the 550.
I’ve installed a mini Kbar and it seems to be working ok apart from some minor twitching, but the big problem is the motor starts spinning up at full throttle regardless where the stick is, no matter what I do?
Throttle curve is set to normal 0-30-60 for testing, throttle hold does work but no amount of changes whether in the tx or trying different esc’s or connections makes any difference.
I’ve looked around on lots of the forums but can’t find much.
Any help would be fantastic.
Cheers
Andy
I’ve installed a mini Kbar and it seems to be working ok apart from some minor twitching, but the big problem is the motor starts spinning up at full throttle regardless where the stick is, no matter what I do?
Throttle curve is set to normal 0-30-60 for testing, throttle hold does work but no amount of changes whether in the tx or trying different esc’s or connections makes any difference.
I’ve looked around on lots of the forums but can’t find much.
Any help would be fantastic.
Cheers
Andy