Island Breeze
Senior Rc-Help Member
First things first..edges are all sanded and smooth. This frame had so many cut out's, it was a pain.
![PB230049.jpg PB230049.jpg](https://www.rc-help.com/data/attachments/6/6752-f8ac8a32c6dd8fa5ab87291c13a004bf.jpg)
Every part was bagged separately with screws that pertained to them. How cool!
![PB230053.jpg PB230053.jpg](https://www.rc-help.com/data/attachments/6/6753-fea3a64dda27dccf5648abce35a8a9b0.jpg)
Well then again not so cool. First bag has two bearing blocks and four servo mounts. the manual says 4 each 6mm screws and 4 each 7mm screws. Correct! it is 4 of each per side. which if I do the math it would be a total of 16 screws, eight of each. well the bag had 8-7mm and 4-6mm screws.
well no holding back, got to continue..
![PB230055.jpg PB230055.jpg](https://www.rc-help.com/data/attachments/6/6755-e8af69052236f734bac24c06316e772e.jpg)
![PB230056.jpg PB230056.jpg](https://www.rc-help.com/data/attachments/6/6756-49f7dfcfa061dd2f5ecc379c86934c2e.jpg)
So it begins..
![PB230049.jpg PB230049.jpg](https://www.rc-help.com/data/attachments/6/6752-f8ac8a32c6dd8fa5ab87291c13a004bf.jpg)
![PB230053.jpg PB230053.jpg](https://www.rc-help.com/data/attachments/6/6753-fea3a64dda27dccf5648abce35a8a9b0.jpg)
![PB230055.jpg PB230055.jpg](https://www.rc-help.com/data/attachments/6/6755-e8af69052236f734bac24c06316e772e.jpg)
![PB230056.jpg PB230056.jpg](https://www.rc-help.com/data/attachments/6/6756-49f7dfcfa061dd2f5ecc379c86934c2e.jpg)
![PB230049.jpg PB230049.jpg](https://www.rc-help.com/data/attachments/6/6752-f8ac8a32c6dd8fa5ab87291c13a004bf.jpg)
Every part was bagged separately with screws that pertained to them. How cool!
![PB230053.jpg PB230053.jpg](https://www.rc-help.com/data/attachments/6/6753-fea3a64dda27dccf5648abce35a8a9b0.jpg)
Well then again not so cool. First bag has two bearing blocks and four servo mounts. the manual says 4 each 6mm screws and 4 each 7mm screws. Correct! it is 4 of each per side. which if I do the math it would be a total of 16 screws, eight of each. well the bag had 8-7mm and 4-6mm screws.
![Facepalm :facepalm: :facepalm:](/images/smilies/facepalm.gif)
![PB230055.jpg PB230055.jpg](https://www.rc-help.com/data/attachments/6/6755-e8af69052236f734bac24c06316e772e.jpg)
![PB230056.jpg PB230056.jpg](https://www.rc-help.com/data/attachments/6/6756-49f7dfcfa061dd2f5ecc379c86934c2e.jpg)
So it begins..
![PB230049.jpg PB230049.jpg](https://www.rc-help.com/data/attachments/6/6752-f8ac8a32c6dd8fa5ab87291c13a004bf.jpg)
![PB230053.jpg PB230053.jpg](https://www.rc-help.com/data/attachments/6/6753-fea3a64dda27dccf5648abce35a8a9b0.jpg)
![PB230055.jpg PB230055.jpg](https://www.rc-help.com/data/attachments/6/6755-e8af69052236f734bac24c06316e772e.jpg)
![PB230056.jpg PB230056.jpg](https://www.rc-help.com/data/attachments/6/6756-49f7dfcfa061dd2f5ecc379c86934c2e.jpg)
Last edited: