murankar
Staff member
Today the 4S TaTu packs showed up with the rc pro plus connectors for 12 - 14 awg.
Just at quick glance, assembly will be fairly easy. Don't need to worry so much about pos and neg. In other words it doesn't matter what side is what; just as long as you assemble the mating side correctly. They are made to snap together one way only.
When doing the actual soldering you will want to slide the housing on first then solder the connector. Pull the housing over the bullets then snap on 2 retaining collars, one for each side.
These particular connectors are simular in size and weight to an EC3. Only real difference over all is the assembly process.
I will add more later I have to get ready for work.
Just at quick glance, assembly will be fairly easy. Don't need to worry so much about pos and neg. In other words it doesn't matter what side is what; just as long as you assemble the mating side correctly. They are made to snap together one way only.
When doing the actual soldering you will want to slide the housing on first then solder the connector. Pull the housing over the bullets then snap on 2 retaining collars, one for each side.
These particular connectors are simular in size and weight to an EC3. Only real difference over all is the assembly process.
I will add more later I have to get ready for work.
.
