bigone5500
Well-Known Member
I finally got around to converting my alkaline pack to NiMh. I got the harness from hobby town and installation was easy. I used my stock wire from the Rx and soldered it onto the harness which I clipped the too short wire from. The switch is on/off with the off position being charge mode. The harness has an extra plug which is snapped into the holder in the top of the battery housing.
![20180616_231245.jpg 20180616_231245.jpg](https://www.rc-help.com/data/attachments/16/16114-5eb8596bd6e4d0e8c8fa4b35c1b4c5c4.jpg)
![20180616_231054.jpg 20180616_231054.jpg](https://www.rc-help.com/data/attachments/16/16113-3578bcf5c4e647c7f3f5bd50aaa4aa8d.jpg)
![20180616_231245.jpg 20180616_231245.jpg](https://www.rc-help.com/data/attachments/16/16114-5eb8596bd6e4d0e8c8fa4b35c1b4c5c4.jpg)