King1229$$$
New Member
I have a Viefy V689 heli and it won't fly grrrr. Can anyone help me out
New Member in need of assistance!
- Thread starter King1229$$$
- Start date
callsign4223
Staff member
What's it doing?
King1229$$$
New Member
When I turn it on, the transmitter won't pair with the heli. The green light keeps blinking and I try to move the throttle up and down like the manual says but it still won't turn solid green. I don't know what could be wrong with it, the heli flew yesterday and is fully charged with new batteries in the transmitter.
King1229$$$
New Member
I have no idea what that is, this is my first R/C heli.
callsign4223
Staff member
This is a 3 channel coax, I doubt it uses a bind plug.
murankar
Staff member
ok no book online either nor are the steps to bind.
with my mcx (blade). I would plug the heli first then turn on the radio while holding the trainer switch up (DX5e). Your radio may have a button or you push one of the sticks into the controller.
Hold it till you get conformation then fly.
one last thing make sure you have 3 feet or 1 meter between you and the heli when you do this.
with my mcx (blade). I would plug the heli first then turn on the radio while holding the trainer switch up (DX5e). Your radio may have a button or you push one of the sticks into the controller.
Hold it till you get conformation then fly.
one last thing make sure you have 3 feet or 1 meter between you and the heli when you do this.
Last edited:
Tony
Staff member
If this is a 3ch heli, I would HIGHLY suggest buying something like the Blade mCX to start out. It's a coax 4ch heli. Once you master that one, get the Blade mSR or Blade 120sr. I also purchased some 3ch heli's and they just don't teach you what you would need to know to move up in the heli world. My $0.02