quadcopter

  1. A

    Quad Calibrate Esc's With Sbus On Pixhawk

    This worked for me by the following steps: 1- Turning on you transmitter, throttle up to max 2-Plugging in your battery (the board then understand you're in programming ESC mode) 3-Wait until the Pixhawk fully loads 4- Push safety switch for 5 seconds, you should hear the Pixhawk send the...
  2. M

    Quad CC3D esc beeps and not arming after crash

    Hi All, So yesterday was out with the quad and I crashed (landed in wet grass, wet enough to have a bit of a splash). After the crash I tried to start it again, but the light on the cc3d turned green when battery was connected and it done a couple of beeps but not the full beeps the esc's...
  3. Furibee F36 Quadcopter Review

    Furibee F36 Quadcopter Review

    GearBest sent me this quad for xmas and I figured why not do a review on it. My thoughts on this little guy are about like they are on the Eachine E010, but it feels like this little guy has more punch than a stock E010. With that being said, if I had to choose between this one and the E010, I...
    • Tony
    • Article
    • f36 furibee gearbest quad copter quadcopter tiny whoop
    • Category: Reviews
  4. K

    Quad Transmitting issue

    Hi I am new to the hobby and have recently build my first quad. I am using a kk2 mini as my fc and I am using a fs t6 controller. After powering it up one day a bit of smoke started coming from my cheap pdb so I quickly shut it down. The battery cables had burnt off and the bottom of the fc...
  5. T

    Other FlySky receiver quadcopter

    Hello Guys, I finally received my stuffs to build my first quadcopter !!! I'm delighted. I manage to make all motors spin in the right sense ! But unfortunatly, I'm having troubles with the receiver. I need it for wednesday and I don't know which one would work for a quadcopter. I found...
Top Bottom