Trucks Thinking About Doing Some Upgrades To My T-maxx It Is A Pro 15

[Brandon Parker]

The right rear w heel is towed out and looks like to me

 

[Tony]

Just adjust the turnbuckle to achieve about 3º of toe in. Below is a video on suspension setup for this truck.

 

[Brandon Parker]

 

[Tony]

Adjust your turnbuckle as I show how to do in that video I posted.

 

[Brandon Parker]

I am frustrated today I got the carb settings all out of whack

 

[Tony]

Revert back to the stock settings and start the tuning process over again.

 

[Brandon Parker]

Ok thank you Tony

 

[Brandon Parker]

Pretty close to having it back to where it was at starts and runs butbut when but but when I the engine wants to cut off

 

[Tony]

Could be a number of things. Your compression could be low, there could be trash in the carb or the filter in the tank could be getting clogged. Just one of those things you have to trial and error to figure out. Might also be the glow plug. Even though it is running, a bad glow plug can still show as good. Watch the video of me driving my tmaxx for proof.

 

[Brandon Parker]

Clean the carburetor last night was a lot hard little bit trash in the carburetor

 

[Brandon Parker]

Pretty much got back to factory settings two and a quarter turned out 2 1\4 of Hi-needle

 

[Brandon Parker]

Now have to set the idle Gap

 

[Brandon Parker]

Having issues getting the carburetor arm in the right position for linkage the little arm or barrels has a set screw in it

 

[Tony]

It's just a trial and error deal. Just keep at it, you will get it.

 

[Brandon Parker]

You think diagram of carb would help we cuz I found one on the internet soso hopefully so hopefully that will help

 

[Tony]

I'm not sure if it will or not.

 

[liquid1]

Is this arm fine tooth splines I have the 3.3 engine it’s setup different

 

[Tony]

2.5 and 3.3 have slide carbs. His is a rotory carb so way different from what you and I have.

 

[liquid1]

That’s what I was thinking never seen his carb thanks

 

[liquid1]

Here’s a good read on the .15 setup
TRX Pro.15 carburetor settings | Traxxas