Alex Evans
Member
Hello pilots, and those like me - trying to be...
Bought myself a new Trex-450L Dominator DFC... I was under the impresion that it is an ARF, but was faced with a box filled with bits, and some surprises....
1) The ESC , RCE-BL70G comes with the 3 motor plugs, too small diameter for the already installed motor male plugs, replaced them...
2) The landing gear, when the machine rests on the skids, on the table, the tail fin is touching the table too, if it is by design, I must ask - why?
3) The instructions in the main manual about the MicroBeast Version 5 included in the box, don't match the instructions attached to the Beast itself...
4) I had an old Spektrum AR7000 , based on several YouTube clips it was suposed to be suitable, it turned out it is NOT. Obviously an Rx made in 2008, is not a good match for the Beast of 10 years+ later....
5) The "Cards" that come with the Beast and the actual manual of version 5, are describing setup steps not matching what the Beast is actually doing... Confirmed to me by an expert!
6) The various video clips on YouTube are showing old video setups, even the one with the 15 steps (excellent job) is not.
So, my questions are:
1) What will be my best option for an RX (My radio is a Spektrum DX9 Black)
2) Can I find anywhere correct setup instructions, where?
Cheers
Alex
Bought myself a new Trex-450L Dominator DFC... I was under the impresion that it is an ARF, but was faced with a box filled with bits, and some surprises....
1) The ESC , RCE-BL70G comes with the 3 motor plugs, too small diameter for the already installed motor male plugs, replaced them...
2) The landing gear, when the machine rests on the skids, on the table, the tail fin is touching the table too, if it is by design, I must ask - why?
3) The instructions in the main manual about the MicroBeast Version 5 included in the box, don't match the instructions attached to the Beast itself...
4) I had an old Spektrum AR7000 , based on several YouTube clips it was suposed to be suitable, it turned out it is NOT. Obviously an Rx made in 2008, is not a good match for the Beast of 10 years+ later....
5) The "Cards" that come with the Beast and the actual manual of version 5, are describing setup steps not matching what the Beast is actually doing... Confirmed to me by an expert!
6) The various video clips on YouTube are showing old video setups, even the one with the 15 steps (excellent job) is not.
So, my questions are:
1) What will be my best option for an RX (My radio is a Spektrum DX9 Black)
2) Can I find anywhere correct setup instructions, where?
Cheers
Alex