yardner
Member
working on my trex pro 450 v2 and trying to get my swash to level at midstick 50%
well i get it to level at midstick but not at low stick 0% or at high stick 100%
90* all servos on the bench before installing
dx6i in DIR mode
throt curve 0-50-50-50-100
pitch curve 0-50-50-50-100
1st pic is at mid stick 50% all is level all three points

2nd pic low stick 0% as you can see the pitch servo is dropping just a little lower??? whats up with that?

3rd pic high stick 100% and here you can see its way off... ail and ele arms are running a little low.?

so what you think guys? what am i doing wrong?
it will fly like this but its not right in the air.
when making turns it want to pitch down and over any which way you rotate/turn it.
thanks
yardner - texas



well i get it to level at midstick but not at low stick 0% or at high stick 100%
90* all servos on the bench before installing
dx6i in DIR mode
throt curve 0-50-50-50-100
pitch curve 0-50-50-50-100
1st pic is at mid stick 50% all is level all three points

2nd pic low stick 0% as you can see the pitch servo is dropping just a little lower??? whats up with that?

3rd pic high stick 100% and here you can see its way off... ail and ele arms are running a little low.?

so what you think guys? what am i doing wrong?
it will fly like this but its not right in the air.
when making turns it want to pitch down and over any which way you rotate/turn it.
thanks
yardner - texas


