New build with the AR7200BX. Castle BEC PRO, Talon 90 ESC & Stock servos.
I am personally a bit anxious to connect the electronics and configure their communication. I do not have experience with the BeastX although I have read it is easy to initialize. I have used the 3GX. I did not notice at first glance that the BX has a button/light type of setup like the 3GX. I have not used a bec either but that seems straight forward as well.
I must admit I have yet to look at either manual for the BX and BEC.
Any words of support, encouragement and suggestions/recommendations are welcome.
I have successfully built two Trex 450s with either the 3GX, GP790 & AR6210 RECEIVER.
I am using the DX6i with all my birds (5) including the 550.
I consider myself a newbie and do simple sport flying with a burning aspiration for more aggressive and 3D flight.
I do practice on the Phoenix Sim.
I am personally a bit anxious to connect the electronics and configure their communication. I do not have experience with the BeastX although I have read it is easy to initialize. I have used the 3GX. I did not notice at first glance that the BX has a button/light type of setup like the 3GX. I have not used a bec either but that seems straight forward as well.
I must admit I have yet to look at either manual for the BX and BEC.
Any words of support, encouragement and suggestions/recommendations are welcome.
I have successfully built two Trex 450s with either the 3GX, GP790 & AR6210 RECEIVER.
I am using the DX6i with all my birds (5) including the 550.
I consider myself a newbie and do simple sport flying with a burning aspiration for more aggressive and 3D flight.
I do practice on the Phoenix Sim.
Last edited: