i totally new to FBL (Trex 500 DFC)
i followed up Mr.Tony's video on youtube to setup the DIR/Gov/Gyro/Flight Modes
i did stone age pitch measurement using the old pitch guage and line on the wall
so i did the 0 degree on mid stick and leveled the swash plate using the zip tie...
Hi to everyone of You :)
My name is Dim and i'm from Greece. (So forgive me for my English and for wrong grammar, but i will try my best to explain what is my problem).
I write this post, with the huge Hope to clear up everything on my confused brain, and to finally solve my problem.
I have an Align 700E T Rex which I fly on a Spectrum DX8 it has a 3GX system with a APS bail out. Recently I crashed my 700 I have now rebuilt it and just hovered it all seems ok. I have done a vibration test on the APS it has passed but.... I was not the expert who installed the...
Am looking for any suggestions/recommendations on the 3GX itself.
I'm flying my first 3GX 5.0 firmware on a CHEAP HK450 with $12 FBL conversion kit.
3S 2200 separate 2S 7.4V battery and BEC for RX and FBL+ servos.
50AMP ESC HK helidrive 3600K/V and 12 tooth pinion.
All digital MG servos...
Tony's video '3GX Setup Guide Part 1 Mounting and Wiring' showed exactly what I am trying to do, up to a point.
I am using a 3GX, an AR6110 (no Aux2), no satelitte receivers and a DX8.
I have wired exactly as Tony describes (albeit for a AR6210 receiver).
Tony, please explain the binding...
I bought a used 450l Dominator that someone gave up on never flown, he had servos and set up all wrong, When I have swash level, servos 90, at mid stick all looks good. But raising or lowering he swash and moving the Aileron and elevator the servos don't level the swash without help. also servos...
Just want to make sure that I have this right before final wiring.
Â· External power into batt/bind port of 3GX
Â· Batt port out on 3GX to Aux 3 on AR8000
Â· Bind/data port out on the AR8000 to the TM1000
Will this work & my understanding with this setup not/never hook satellites to the 3GX...
I followed the steps of the video 7 (Align 450 Pro V2 3GX Build Guide Part 7 Basic Gyro Setup) and I will try to explain what is going on.
When I do the first step of the Gyro setup (elevator endpoint setup) and press the button again on the 3GX and turn the helicopter to...
Hi you all. First of all, I hope this is the right place start this post. I looked in the forum and didnÂ´t find any suitable thread.
I just finished wiring my Trex 450 3GX. i had previously bound my TX (DX7S) to the receiver and the satellite, no problem there. What I need to know is if itÂ´s...
Hi everybody, my name is Mauricio and i'm from Chile. ItÂ´s not easy being in this hobby here since there are not many stores to get RC machines...not to mention spare parts.
I was given a coaxial last year as a present, learnt to fly it (wasnt that hard), moved to some 4ch 250's and now I've...