sarconastic
Member
I had read several articles that said the Turnigy 9X and the Flysky FS-ct6b would bind with the V911's.Tthey said the v911's used Flysky tech. But I couldn't find anything on how to do it with my FlySky FS-T6. So I ordered one in an attempt to get it to work. Tried to bind it the first night and it wouldn't do it. But I finally Figured it out.
But it DOES WORK. To Bind it. Here is how. I set mine up in Mode 2 and you MUST make sure the throttle channel is completely off or it will not work correctly.
***Warning**** When you start flying with the flysky your in full rate mode unless you reduce the channel throws a bit. So the first time you go up it will seem squirrely as all get out. just drop your throws a bit and she flies great.
I had to reverse channel 2 .
Now I can just order the V911 Bind and flys to go with my FlySky Radio. I have the new style V911 with the small battery connectors. So this confirms the new ones still use the FlySky style receiver.
I will do a write up on this my blog once I tweak the transmitter a bit and post a link here.
Woody
But it DOES WORK. To Bind it. Here is how. I set mine up in Mode 2 and you MUST make sure the throttle channel is completely off or it will not work correctly.
- Plug the battery into the V911 Heli.
- Press and hold the Bind key on the back of the FS-t6 and then turn on the radio.
- After about 5-8 seconds release the Bind button.
- Turn off the FS-T6
- Turn the FS-T6 back on.
- Fly Away.
***Warning**** When you start flying with the flysky your in full rate mode unless you reduce the channel throws a bit. So the first time you go up it will seem squirrely as all get out. just drop your throws a bit and she flies great.
I had to reverse channel 2 .
Now I can just order the V911 Bind and flys to go with my FlySky Radio. I have the new style V911 with the small battery connectors. So this confirms the new ones still use the FlySky style receiver.
I will do a write up on this my blog once I tweak the transmitter a bit and post a link here.
Woody